Estate Fencing and Park Fencing
Estate fencing - park fencing professionally installed/painted @ £36.50-£65 per metre plus VAT anywhere in the UK. Minimum orders apply. Smaller and local orders priced accordingly. Fencing is priced based on the following criteria. Steel price @ time of order, location and quantity of fencing.
For an exact price per m simply email us: xc@designermetal.co.uk (or phone us on: 01473 658111) with your post code or nearest post town and an estimate of fencing meterage. You may also include gate requirements. You will receive a quote back which we will keep on file and stand by for 2 months.
Please scroll down for full specification (including steel section sizes), fencing styles and a detailed explanation of our installation method.
Designer Metal specializes in the fabrication and installation
of traditional estate fencing. Also referred to as park
fencing or parkland fencing, it is a modern reproduction
of the traditional iron fencing of old, used on estates
and parkland for retaining stock and decoration. We have
installed many miles of fencing in a wide variety of soil
types. The use of generous steel sections and our method
of installations, gives our product great rigidity and strength.
You are truly investing in a last-a-lifetime fence that
will be enjoyed by generations to come.
As standard we produce two types of estate fencing.
Both stand 1.15m tall approx (variations on request). The
posts are spaced at 1 metre apart and both have 5 traditionally
spaced rails (small gap nearer the ground with each spacing
becoming greater as they rise up the fence) and can be finished
in a colour of your choice or left to self colour.
50 x 12mm posts and 5 20mm solid round rails standing 1.15m tall more than capable of retaining heavy stock...
|
|
Or (40 x 12 mm posts with a solid 20mm round top rail and 4 25 x 8 mm flat rails below standing 1.15 m tall). |
We also offer both the above styles in a 4 rail system standing 95 cms tall. Perfect for gardens.
50x12 posts with 4 20mm solid round rails standing 95 cms tall.
|
|
40x12 mm posts with a 20mm solid round top rail and 3 25x 8mm flat rails standing 95 cms tall. |
We publish our spec and section sizes because we are proud to
produce a product that is built to last. As far as we are aware,
we are the only company who install estate/park fencing in the
way we do.
The advantages of our method are clearly demonstrated in the
photos above. It allows us to follow contours and curves in
a way that is just not possible with pre-fabricated panels.
Tree protection and a terrific feature in this meadow.
 |
 |
 |
First we drive each post deep in to the ground. Then all
the rails are run through and trimmed to length.
|
|
 |
|
Then everything is welded up on-site. Should a finish
be required, a high zinc based primer top coat is applied in a colour of your choice.
|
Kissing gates, an attractive way of restricting access.
Decorative Ends and Finishers as well as End Posts for fence lines avalable.
Designer Metal pre-fabricated panels
Designer Metal produces top quality fencing panels. Weighing
in at 45 kg and constructed from heavy steel sections, 40x12
mm posts, 20 mm solid bar top rail, four 25x8 mm flat rails,
they are finished with a high zinc primer and top coat (different
colours on request).
We publish section sizes and spec because we are proud
to produce a product that's built to last.
Panels can be supplied with 20mm round top rail with four
25x8 mm flat bottom rails or four 16 mm round bottom rails
with "devils claw " feet for pushing into the ground
(shown in photos) or extended posts for concreting into holes.
These 2 metre long panels simply bolt together to form a continual
fence.
Specifications (Variations on request):
Length: 2 metres
Height: (installed) 1.15 m
Devils Claw: 40 cms x 40cms x 40cms or extended posts 50cms
Rail centres from ground:
Bottom rail: 14.5 cms
Rail 2: 34cms
Rail 3: 56.5cms
Rail 4: 82cms
Top Rail: 113 cms
|
